Search results for: 'flat zip trolley and 30xx 56 hand'
-
Rope Washer by CMIAs low as $52.75Rope Washer by CMI - The unique flow pattern created by CMI's exclusive ducting creates a spiraling, multi-jetting flow pattern that lifts dirt and contaminants out of rope better than conventional designs. Constructed from tough PVC, CMI's rope washer attaches to any standard spigot or garden hose. Learn More
-
Petzl Toolbag$39.53The TOOLBAG tool pouch allows the user to organize his tools during suspended work. Cordlock allows the pouch to be closed easily during transport or when moving about. Learn More
-
Petzl Sirocco Helmet$171.53With a maximum weight of 165 g, the SIROCCO helmet sets a new standard for lightness. The one-piece construction minimizes helmet weight while retaining excellent impact resistance, due to the mechanical properties of expanded polypropylene (EPP). Learn More
-
Thimbles: Stainless Steel ThimblesAs low as $1.32Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More
-
Robertson Adjustable LanyardsAs low as $66.221-3/4" Nylon Webbing Ajustable Lanyards are used for protection on high ropes courses, adventure courses, industrial heights and a variety of home applications. Learn More
-
Petzl Stop Descender Device$186.95Originally designed for single rope descents in caving, the Stop has become a standard tool for the rope access worker. The Stop is designed to automatically "stop" the descent when the red handle is not depressed. Learn More
-
Steel Locking D Rescue CarabinersAs low as $44.00Designed to be the ultimate, general purpose rock climbing, rescue or ropes course carabiner, the CMC Rescue Steel Locking D combine CMC's experience in rescue with Omega Pacific's manufacturing expertise. Learn More
-
Universal Accessibility Kit (UAK-1)
Starting at $23.78
Looking to enhance your program offerings with some specialized equipment? ESI offers three different universal accessibility kits that come complete with a variety of equipment that will help serve the needs of climbers who need additional support.
The UAK-1 comes complete with the following:
If you need additional components for a larger course, ask us about the UAK-2 and UAK-3.
- Misty Mountain Easy Seat - a specialized rigid yet padded seat that has an integrated rated harness system allowing lower body support without sacrificing upper body mobility.
- Handlebar Ascender (Wellman pull-up bar or similar) - a traditional ascender mechanism that will grab the rope with the integrated cam while also providing a variety of hand hold options including the built in handlebars.
- 1M Mechanical Advantage System (Petzl JAG or similar) - this compact system provides mechanical advantage at your fingertips when climbing at height and needing assistance transferring from one cable to the other.
- Trolley w/ anti-rollback cam (ISC Zippy or similar) - this trolley allows for smooth forward movement on a course and option to sit in the system and take a break without losing forward momentum.
- Bosun chair (Petzl Podium or similar) - a rigid chair that is stowed out of the way on the climber and dropped into position at any point along the climb as an extra seat providing quick lower body support and resting spot.
- ISC R-ALF Pulley System - this system creates a 5:1 mechanical advantage with integrated locking hub option for those climbers who need assistance ascending vertically into a course. It includes everything needed for the full system including the R-ALF hub, two double pulleys, rope, carabiners and a handy storage bag.
-
CMI Twin Expedition Arborist Ascender$226.55CMI Twin Expedition Arborist Ascender, The Twin Expedition is the first single-handled dual ascender designed to meet the needs of industry leading arborist professionals. The EXPTWIN easily accommodates three rope techniques - 2:1 doubled rope technique (DdRT), 1:1 single rope technique (SRT), and 1:1 twin line ascent (DbRT). Learn More
-
Adjama Climbing HarnessAs low as $98.93Adjama Climbing Harness, Lightweight and very flexible, thanks to the Delta System leg loop front panels and small dimension leg buckles. Learn More
-
CMI Micro Haul Pulleys$209.37The perfect size for light and tower rescues. Fits ropes from 8mm to 1/2". Features built in safety cam for use in "jigger" or "short haul" systems. Use with CMI micro single or double pulley 3:1 or 4:1 mechanical advantage systems. Features a centered bronze bushing. Strength: 7000 lbs. The CMI Single Micro Hauler is 154 mm. tall, 53 mm wide, and 40 mm. thick and 19 g. Learn More
-
Petzl I'D Belay Device DescenderAs low as $351.95The Petzl ID is a self-braking descender with an anti-panic function built in. Learn More
-
Robertson Lobster Claws$39.82These lobster Claws are a unique, non-adjustable set of positioning / safety lanyards designed specifically for program high ropes courses. Learn More
-
CLICK-UP PLUS BELAY DEVICE WITH HMS$98.99
CLICK UP + is an innovative belay device with manual assisted-braking, designed for indoor and crag climbing. It can be used with 8.5-11mm single ropes. The CLICK UP + is compact and lightweight. Allows for the belayer to keep both hands on the rope while belaying or lowering the climber. The V-Proof System (patent pending) reduces the chance of error due to an incorrect handling of the rope when braking. CLICK UP + is supplied, and must be used together, with the specific HMS carabiner CONCEPT SGL HC. The wear-resistant anodizing and ACL system of the carabiners prevents the possibility of minor-axis cross-loading.
- Weight: 110 grams
- Rope diameter range: 8.5mm - 11mm
- CE and UIAA Certified EN15151-2:2012 type 2
-
Rope Ladders: Custom Rope Ladder$21.05
The Rope Ladder provides moderately challenging access to high elements or an alternative to staple climbs. Constructed of double lashed hardwood dowels with waxed nylon cord to increase durability. Professional installation required.
Cost is by: LINEAR FOOT
Learn More -
Petzl Panji Harness$105.53PANJI adventure park/zipline harness is a one size harness covering a very wide range of body sizes. Learn More
-
AVAO BOD HarnessesAs low as $451.39AVAO BOD Harnesses, The harness also facilitates carrying and organization of tools with multiple equipment loops and retainers for attaching CARITOOL tool holders and TOOLBAG tool-holder pouches. Learn More
-
Edelrid KAA Haul System - 150CmSpecial Price $249.98 Regular Price $277.20
The KAA is a self contained mechanical advantage system for tensioning lines or lifting people during rescues. In addition, as the KAA is certified to EN 354, it can be used for workplace stabilization, as a restraint system (open/closed), and for controlled lowering. Its strap-based construction makes it the most compact and lightweight system on the market. Depending on the orientation, it offers a 4:1 or 5:1 lifting ratio with an efficiency of 91%. The KAA is packaged compactly and ready for immediate use, so that no valuable time is lost when it is required. A swivel is provided at each end to prevent the system from twisting. The hand lever on the draw cord makes it easier to pull and can also be used as a lowering lever.
Weight: 500g (1.1lbs)
MBS: 22kN
Certification: EN 354
Efficiency: 91%
- Compact and lightweight due to strap-based construction
- 4:1 or 5:1 mechanical advantage
- Can be set up in seconds
- Swivels on both ends
-
Petzl Pandion Harness$76.95Petzl Pandion Harness, Adjustable leg loops allow size to be adjusted depending on comfort desired or layers of clothing worn and permit the harness to be put on when wearing skis or crampons Learn More
-
GUY ANCHORS- Helix Ground Anchors : 10" x 1-1/4" x 96"$197.95GUY ANCHORS- Helix Ground Anchors : 10" x 1-1/4" x 96" Learn More
-
GUY ANCHORS- Helix Ground Anchors : 8" x 1" x 66"$104.65GUY ANCHORS- Helix Ground Anchors : 8" x 1" x 66" Learn More
-
GUY ANCHORS- Helix Ground Anchors : 4" x 3/4" x 54"$65.05GUY ANCHORS- Helix Ground Anchors : 4" x 3/4" x 54" Learn More
-
GUY ANCHORS- Helix Ground Anchors : 6" x 3/4" x 66"$75.61GUY ANCHORS- Helix Ground Anchors : 6" x 3/4" x 66" Learn More
-
-
SINGING ROCK PROFI WORKER 3D STANDARD HARNESS$258.45
Fully adjustable harness for work positioning withcontinuous adjustable webbing, SPEED buckles, padded wide waist belt, anatomicleg loops and shoulder straps.
- super comfortable wide waist belt padding provides maximum comfort when working at height
- strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only
- reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements)
- anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance
- standard easy lock buckles enable smooth adjustment
- narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work
- leg loops connection straps made from durable PES webbing for better abrasion resistance
- front and back attachment points for fall arrest according to EN 361 marked with additional “A“ marking
- flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus
- front lower attachment point for descender placement or work positioning according to EN 813
- 2 side attachment points for work positioning according to EN 358
- 4 ergonomic braided gear loops with a bearing capacity of 5 kg
- heavier items up to 35 kg can be attached to the webbing on the waist belt
- additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization
- wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter)
- slots at the waist belt for Porter tool holder to carry your industrial tools
- shoulder attachment points for confined space rescue according to EN 1497
- chest ascender smart fixation system (using an additional maillon), works best with Cam Clean
- all steel components finished with E-coating for higher corrosion resistance
- identification and methodical label
- Weight: 177g, 62.68oz
- Max Rated Load: 150 kg
- Certifications: EN 358, EN 361, EN 813, EN 1497, CE 1019
-
Wire Rope - Zipline Cable Ferrule - Zinc PlatedAs low as $2.48Zipline Cable Ferrule - Zinc Plated, Two ferrules are required for life support and ziplining applications (ACCT Standards). The extra ferrule serves as a backup in case of primary ferrule failure due to defects or improper swaging. A 12 ton crimper/compression tool is required for 1/4" - 1/2" ferrules Learn More
-
EYE NUTS and EYELETS$10.56EYE NUTS and EYELETS, Eyelets, also known as Bolt Eyes, are used under the head or nut of a bolt. All are compatible with the strength of the bolts used with them. Learn More
-
Bungee Cord Shock CordAs low as $27.50Nylon Shock Cord consists of a stranded rubber core covered with braided fiber resulting in an elastic cord with consistent stretch and strength. The durable "bungee type" cord is covered with nylon. Learn More
-
Round Washers: galvanized washersAs low as $0.33Used as spacers or supports under screw or bolt heads. Our washers are heat treated galvanized. Learn More
-
Lock Washers: Single & Double Coil Lock WashersAs low as $0.33Lock washers are a critical component to through bolts on wood poles. Pole shrinkage mandates the use of double coil lock washers to keep pressure on the nut and bolt to prevent loosening. Learn More
-
Aspir Adjustable Harness$92.33Aspir Adjustable Harness, Its low bulk and large range of adjustability also make it great for mountaineering and glacier travel. A great harness too for via ferrata and adventure parks. Learn More
-
Petzl Am'D CarabinerAs low as $20.08Petzl Am'D Carabiner - Add security to your climbing anchors with the Petzl Am'D Traict Locking Carabiner. Take your pick of Petzl's Screw-Lock, Ball-Lock, or Triact-Lock gate to perfectly match your preference. The Am'D Carabiner also has a snag-free keylock gate to assure it never snags on gear when you're building a solid anchor at the top of the pitch you just climbed. Learn More
-
Wire Rope - Zipline Cable Copper Ferrule -1/4"$2.31Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More
-
Wire Rope - Zipline Cable Copper Ferrule -3/8"$5.50Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More
-
Wire Rope - Zipline Cable Copper Ferrule -1/2"$9.90Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More
-
Machine BoltsAs low as $5.45Our Machine Bolts are hot dip galvanized, forged steel, quenched and tempered and are sold with hex nuts attached. Round or square washers and lock washers can be added separately. Learn More