Search results for: 'steel belai device'

The NEST litter was developed in partnership with the French national caving rescue organization. It allows a victim to be transported horizontally, vertically or at an angle. Learn More

A step up in strength and durability from the RP101 rope pulley. Black Anodized Aluminum sideplates, 2 3/8" Aluminum sheave, Bushing, and Stainless Steel axle. A great all around rope pulley. Learn More

Openable even when attached to the anchor, the PRO pulley is designed for maximum simplicity when setting up hauling or load deviation systems. Learn More

Innovative HMS carabiner with automatic locking mechanism. Learn More

Headwall Universal Harness, The headwall is a 'double back' harness. This style takes longer to put on but will not loosen over time as parachute buckle harnesses can do Learn More

Ropes Course Zip Line Staples, Staples are the preferred way access ropes challenge course elements and zip line platforms: easy to install, easy to inspect, and easy to climb. If properly installed, the 8" staples can perform as fall protection anchors Learn More

The Kong "Y" Rescue Lark's Foot is an asymmetric security loop in Y-shape of 13mm tape for self-securing canyoning. Learn More

CONNEXION FIXE Anchor strap, Forged steel D-rings on the ends. The Connexion Fixe anchor strap is the climbers choice for top rope anchor systems. This anchor strap is the best for rock climbing rope systems. Learn More

Rope thimbles protect the rope from wear whenever you have a fixed loop in the end of the rope, whether the rope is tied, spliced, or swaged. Learn More

The perfect size for light and tower rescues. Fits ropes from 8mm to 1/2". Features built in safety cam for use in "jigger" or "short haul" systems. Use with CMI micro single or double pulley 3:1 or 4:1 mechanical advantage systems. Features a centered bronze bushing. Strength: 7000 lbs. The CMI Single Micro Hauler is 154 mm. tall, 53 mm wide, and 40 mm. thick and 19 g. Learn More

The Zip Line Spreader Bar is used in conjuction with the ARC Harness to keep the attachment points equally spread and to prevent pressure on the participant. Can also be used to help the handicapable safely go down a zipline when used along side a Fusion Learn More

Fully adjustable full body harness intended for rope courses and adventure parks.

• CE 1019, EN12277, EN161
• front attachment point for belaying and rappeling according to EN 12277 type C
• waist belt and the leg loops without the padding enables to put the harness to every person
• rear steel D-ring with a bearing capacity of 15 kN according EN 361
• waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
• red webbing strap stitched into the buckles simplify handling with them
• all steel components are finished with E-coating technology for higher corrosion resistance
• left leg loop with red color helps to put the harness on
• waist belt webbing is in red as well for easier orientation in the harness
• dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
• construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
• Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
• Weight: 1050g
• Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)

Learn More

The Cadillac is versatile enough to be used on big walls,zip line, but shines brightest on multi pitch and traditional routes. Constructed wide for comfort, the Cadillac incorporates an inner waist belt layer that spreads forces over 2.7 times more area Learn More

Adjama Climbing Harness, Lightweight and very flexible, thanks to the Delta System leg loop front panels and small dimension leg buckles. Learn More

Kong Futura Hand Ascender, It is extremely small though easy to use, weighs only 125g, and comes with two different sized handles for ergonomic customisation Learn More

The Am'D PIN-LOCK asymmetrical aluminum carabiner is designed for use with groups. It secures the connection of the user thanks to its PIN-LOCK system, which can only be opened by the operator with a specific unlocking tool. Learn More

Gripple Ropes Course Cable Connector, Learn More

These are great carabiners for clipping clients into zip line, rock climbs, ropes course and challenge course elements. These carabiners are light weight, strong and have a wide gate opening. Now made by SMC

Learn More

The HaulerBiner Compact Rescue Kit is a lightweight, compact and simple to use/deploy device. The HaulerBiner is fully rated for lifting people. The HaulerBiner has three pulley wheels incorporated into each carabiner, creating a compact and lightweight 6:1 or 7:1 (theoretical) mechanical advantage system. The HaulerBiner also has a purpose-designed progress capture cam with, an ‘on/off’ position.  The HaulerBiner utilises purpose-developed 6mm (1/4") rope, for strength and easy handling/best grip.  The kit is supplied in a two-pouch bag, for easy deployment. The HaulerBiner is load rated to 140kg (310lbs) but it has an MBS of at least 16kN/3500lbs tested as a complete system. The length of the system, when fully contracted is only 32cm (12"). EN 12278, EN 567 certifications

Learn More

The Y Tail - Participant Ropes Course Lanyard is manufactured from 1/2" high quality US manufactured PolyDacron 3-strand rope. The lanyard has a loop for girth hitch attachment to the harness and two ANSI rated double-locking snap hooks for connection to the lifeline (belay cable). Lanyards are adjustable from 4' (48") to 6'5" (77").

Learn More

Detachable Pole and Tree Step, These are the preferred security steps for ropes challenge courses either rin trees or poles. Lag bolt and plate are installed into a ropes course pole or tree. Learn More

The symmetrical aluminum OK carabiner has an oval shape that allows optimal positioning of equipment with a wide section. Its Keylock system facilitates manipulations. Learn More

Joko I & Y Lanyards, These are used in traditional via feratta settings as well for park staff. For participants, however, we recommend the use of an "Always On" system. Learn More

UltraSonic Finish: the core and the sheath are bonded together at the rope ends by an ultrasonic process called UltraSonic Finish; gives greater durability and avoids frayed ends. Learn More

Peguet Maillon Rapide Delta quick links in plated steel and stainless steel. Bulk packaged.

• 10mm Weight: 153 grams. Strength: 45kN CE

Learn More

Stainless steel sideplates, 3"aluminum sheave, bushing, and stainless steel axle. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	5/8"	6.5x4.25in	1.35lb	92.1%

Learn More

The PIRANA descender offers multiple braking options and can be installed on the rope without removing it from the harness. Designed for use with canyoning descent techniques. Learn More

Black anodized aluminum sideplates, 2 3/8" zinc coated steel sheave, bushing, and stainless steel axle. 

MBS	Cable/Rope Capacity	Size	Weight	Efficiency
6000lbs	5/8"	4.375x3.5in	0.75lb	91.4%

 

Learn More

The Rescue Figure 8 is a special figure 8 for rescue situations and fast rappeling.  It has a special shap for multiple rope locking, allows rappeling with heavy loads, has a high strength, and fits a wide range of rope diameters. Available in light alloy or stainlees steel.

• Weight: 154g, 5.43oz (alloy) 451g, 15.9 oz (stainless steel)
• Material: Light alloy or stainless steel
• Strength: 40kN

Learn More

Serving Sleeves, These are usually in a 1x7 configuration: 1 bundle of 7 strands. Cable used in ropes courses and zip lines is usually 7x19 or 6x24: Much more flexible Learn More

Stainless steel sideplates, 3" red anodized aluminum sheave, bushing, and stainless steel axle. 

*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	1/2"	6.75x5.25in	1.65lb	91.7%

 

 

 

Learn More

HIT Lever hoists have a rugged contruction and a cover to protect the gear case and the brake equipment. The drop forged and heat treated alloy hooks are equipped with safety latches to ensure safety at all times. The steel handle rotates 360 degrees for operation in any posistion. The chain is made from high quality alloy steel and has been specially heat treated for high breaking stress and durability. This hoist has been tested 1.5 times its rated capacity.

• Designed for construction and industrial lifting and pulling applications.
• Rugged steel body construction, lightweight, compact and portable.
• Powder coat painted to protect against rust and corrosion.
• High Tensile alloy steel chain is heat treated for safety and low-wear.
• Shock resistant gear case and brake cover.

Learn More

Rope Washer by CMI - The unique flow pattern created by CMI's exclusive ducting creates a spiraling, multi-jetting flow pattern that lifts dirt and contaminants out of rope better than conventional designs. Constructed from tough PVC, CMI's rope washer attaches to any standard spigot or garden hose. Learn More

The Felco C16 Wire Cutter has a capacity of 5/8 in. diameter and smaller. This is the GO-TO zipline cable cutter in the industry. Felco cutters keep cutting for years longer than other cable cutters. Learn More

Our Machine Bolts are hot dip galvanized, forged steel, quenched and tempered and are sold with hex nuts attached. Round or square washers and lock washers can be added separately. Learn More

Snap hooks are recommended as they are easier for small hands, more ergonomically friendly and are permanently attached to the lobster claws. Learn More