Search results for: 'steel steel belay devices'

The Rescue Figure 8 is a special figure 8 for rescue situations and fast rappeling.  It has a special shap for multiple rope locking, allows rappeling with heavy loads, has a high strength, and fits a wide range of rope diameters. Available in light alloy or stainlees steel.

• Weight: 154g, 5.43oz (alloy) 451g, 15.9 oz (stainless steel)
• Material: Light alloy or stainless steel
• Strength: 40kN

Learn More

The Sawtooth is a perfect belay/rappel carabiner. Its large surface area makes for silky smooth rappels and belays. In addition to everything else it has to offer, the price is right! Keylock gate system reduces snags.

• Weight: 90 grams
• Strength: 23kN
• CE EN12275:1998-H EN362:2004-B

Learn More

Stainless steel sideplates, 3" red anodized aluminum sheave, bushing, and stainless steel axle. 

*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	1/2"	6.75x5.25in	1.65lb	91.7%

 

 

 

Learn More

HIT Lever hoists have a rugged contruction and a cover to protect the gear case and the brake equipment. The drop forged and heat treated alloy hooks are equipped with safety latches to ensure safety at all times. The steel handle rotates 360 degrees for operation in any posistion. The chain is made from high quality alloy steel and has been specially heat treated for high breaking stress and durability. This hoist has been tested 1.5 times its rated capacity.

• Designed for construction and industrial lifting and pulling applications.
• Rugged steel body construction, lightweight, compact and portable.
• Powder coat painted to protect against rust and corrosion.
• High Tensile alloy steel chain is heat treated for safety and low-wear.
• Shock resistant gear case and brake cover.

Learn More

Fully adjustable full body harness intended for rope courses and adventure parks.

• CE 1019, EN12277, EN161
• front attachment point for belaying and rappeling according to EN 12277 type C
• waist belt and the leg loops without the padding enables to put the harness to every person
• rear steel D-ring with a bearing capacity of 15 kN according EN 361
• waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
• red webbing strap stitched into the buckles simplify handling with them
• all steel components are finished with E-coating technology for higher corrosion resistance
• left leg loop with red color helps to put the harness on
• waist belt webbing is in red as well for easier orientation in the harness
• dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
• construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
• Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
• Weight: 1050g
• Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)

Learn More

Petzl P42 Caritool, A carabiner-shaped tool holder designed to organize gear attached to a harness. Ice-screws, pitons, cams, as well as small tools, can be arranged and accessed single-handedly Learn More

Keep your Head Rush zipSTOP Zip Line Brake looking newer longer with a replacement Side Cover Assembly. This cover is easy to replace in the field—no tools required. Learn More

The Felco C16 Wire Cutter has a capacity of 5/8 in. diameter and smaller. This is the GO-TO zipline cable cutter in the industry. Felco cutters keep cutting for years longer than other cable cutters. Learn More

Keep your Head Rush TRUBLUE XL looking newer, longer with a replacement Side Cover Assembly. This cover is easy to replace in the field—no tools required. Learn More

The quality of this carabiner is second to none! It is smooth, easy to handle, won't jam, and the price is right. Learn More

The Rattle Stop is a replacement for the part that comes with your zipSTOP Zip Line Brake. Learn More

The Y Tail - Participant Ropes Course Lanyard is manufactured from 1/2" high quality US manufactured PolyDacron 3-strand rope. The lanyard has a loop for girth hitch attachment to the harness and two ANSI rated double-locking snap hooks for connection to the lifeline (belay cable). Lanyards are adjustable from 4' (48") to 6'5" (77").

Learn More

Our Machine Bolts are hot dip galvanized, forged steel, quenched and tempered and are sold with hex nuts attached. Round or square washers and lock washers can be added separately. Learn More

Innovative HMS carabiner with automatic locking mechanism. Learn More

Headwall Universal Harness, The headwall is a 'double back' harness. This style takes longer to put on but will not loosen over time as parachute buckle harnesses can do Learn More

Ropes Course Zip Line Staples, Staples are the preferred way access ropes challenge course elements and zip line platforms: easy to install, easy to inspect, and easy to climb. If properly installed, the 8" staples can perform as fall protection anchors Learn More

Snap hooks are recommended as they are easier for small hands, more ergonomically friendly and are permanently attached to the lobster claws. Learn More

The Zip Line Spreader Bar is used in conjuction with the ARC Harness to keep the attachment points equally spread and to prevent pressure on the participant. Can also be used to help the handicapable safely go down a zipline when used along side a Fusion Learn More

CMI "Beast" Tour Trolley Pulley, Designed for the fast lane of zip line tours, this trolley features a front bumper, reinforced 'crimped' side bars and forward facing design with drop down handles. Learn More

Our new Ultrascenders are designed to be the most convenient and easy to use ascenders around. We've added a new ergonomically designed safety mechanism which is integrated into the handle channel for maximum ease of use in those long "over the lip" stretches. Learn More

Utilizes a highly efficient tear-stitch webbing to absorb energy by means of controlled destruction. Learn More

This Cable Spooler is Made of sturdy heavy-duty steel tubing and folds for easy storage and had a tough, durable finish.

• Maximum reel width: 18";
• Height from floor to rod: 13"
• Weight: 7.5lbs;
• Holds: 200lbs.

Learn More

Our new Ultrascenders are designed to be the most convenient, easiest to use and most comfortable ascenders around. We've added a new ergonomically designed safety mechanism which is integrated into the handle channel for maximum ease. Learn More

These splicing fids are used to make splicing rope easier. Fid is made from stainless steel and hardwood.  Comes in two sizes

Small: for rope sizes up to 58"

Large: for rope sizes 5/8" and larger

Learn More

Adjama Climbing Harness, Lightweight and very flexible, thanks to the Delta System leg loop front panels and small dimension leg buckles. Learn More

Gripple Ropes Course Cable Connector, Learn More

The "COBRA" cable pulley zip line trolley represents the most advanced design work using state of the art engineering techniques to build the safest and finest zip line trolley for the ropes course industry. Learn More

The Head Rush Brake Trolley is a replacement for the brake trolley that came with your zipSTOP Zip Line Brake. Learn More

William Carabiner, Available with manual locking system (SCREW-LOCK) or automatic locking system (BALL-LOCK, TRIACT-LOCK). Learn More

Detachable Pole and Tree Step, These are the preferred security steps for ropes challenge courses either rin trees or poles. Lag bolt and plate are installed into a ropes course pole or tree. Learn More

Kong Futura Hand Ascender, It is extremely small though easy to use, weighs only 125g, and comes with two different sized handles for ergonomic customisation Learn More

Joko I & Y Lanyards, These are used in traditional via feratta settings as well for park staff. For participants, however, we recommend the use of an "Always On" system. Learn More

Nut Eye bolts are the main bolts used in ropes challenge course and zip line construction. Zipline and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More

Red/Black anodized aluminum sideplates, two 3" aluminum sheaves, bushing, and stainless steel axle. 

 *Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.  *Not Certified*

 

MBS	Rope Capacity	Size	Weight	Efficiency
12000lbs	1/2"	10x4in	2.6lb	184%

Learn More

Our HyperBars, a solid anodized aluminum bar with a single lock-off pin, allow for easier and safer lock offs. The HyperRack includes a single HyperBar. Learn More

The Felco C112 Cutter features maximum force transmission which applies the maximum leverage at just the right moment. This coupled with Swiss precision blades make this cutter very easy to use. Learn More