Back to Top
Search results for: 'steel gold tool'
- Did you mean
- steel good tool
- steel goods tool
-
Robertson Adjustable Lobster Claws$83.82These are the basic model with NO snap hooks or Zorber. These are only appropriate for clipping in to protection with some dynamic load absorbing features like rope or fairly slack cable such as a belay cable on a high ropes course or zipline. Learn More -
Petzl Vertigo Carabiner$32.93The VERTIGO TWIST-LOCK carabiner is designed for use on progression lanyards. Its ergonomic design and automatic locking system facilitate manipulations when passing intermediate anchors. Learn More
-
GriGri 2 Belay Device$109.95The GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. Learn More
-
Nail Chipper Tri-Cut Auger BitsAs low as $48.32Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More
-
Robertson SR71 Hammer Zip Line Trolley$227.04Using machined axles which may cost more but give the SR-71 Hammer zip line trolley unparalleled structural integrity. Learn More
-
Petzl TOP Harness$145.13The TOP chest harness transforms the AVAO SIT, FALCON and SEQUOIA SRT seat harnesses into fall arrest harnesses. The foam shoulder straps are widely spaced to reduce neck chafing. Learn More
-
CMI EXPEDITION ASCENDERAs low as $118.76CMI EXPEDITION ASCENDER, The Expedition Ascender is a perfect choice for big wall or mountaineering endeavors. Engineered for comfort, the handle opening is extra wide to accommodate gloved hands. Works with 7mm-12mm ropes. Sold individually. Learn More
-
Lag Screws: Lag BoltsAs low as $1.76Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More
-
Deep Cut Pole Auger Bits: 24"As low as $46.70Deep Cut telephone Pole Auger Bits: 24", Super long 24" Pole Auger Bits for telephone poles, utility poles, treated poles, ropes course and zip line poles. Designed for making deep cuts in utility poles, pressure treated lumber, railroad ties, and wet or frozen lumber. Learn More
-
7/16" - 9/16" AUGER BITS - Pilot bitsAs low as $17.00We offer three different style of pilot auger bits for 1/2" lags for ropes course decks, zip line decks and general deck construction for 1/2" & 5/8" lag bolts Learn More
-
ETD - Ropes Course Rescue Bag - 150' Rope$539.00
The ETD - Ropes Course Rescue Bag is filled with essential items to preform a aerial rescue. If there are extra items you require for you rescue bag simply order them separately and toss them in you bag.
Contents:
- 1 - Medium Orange Rope Bag w/Rope History Record - 150'
- 1- 7/16" x 100', 120' or 150' KMIII Orange Static Rope
- 6' - 5mm Tech Cord for Tying Prusik
- 1 - Pair EMT Shears
- 1 - Aluminum Rescue 8
- 4 - Steel Screw-Gate Big D Carabiners
- 1 - BFD/ATC (Belay Friction Device)
- 1 - 5 Step Easy Step Aider
- 1 - Set Fixed Length 1" Heavy Duty Webbing Lobster Claws w/Zorber & Hooks
-
Petzl Panji Harness$105.53PANJI adventure park/zipline harness is a one size harness covering a very wide range of body sizes. Learn More
-
Petzl Pro Traxion$191.33The PRO TRAXION progress capture pulley is designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads. Learn More
-
A.L.F. AUTO BELAY/LOCKING PULLEYAs low as $471.90This innovative, all-in-one Pulley/Auto belay for fall protection is lightweight and easy to use. Auto belay pulley Locks in either direction (right or left) while climbing up or down. Learn More
-
Robertson Lobster Claws$39.82These lobster Claws are a unique, non-adjustable set of positioning / safety lanyards designed specifically for program high ropes courses. Learn More
-
-
Petzl Trac Plus Zip Line Trolley$211.13TRAC PLUS Zip Line Trolley, They cannot be dropped, thanks to the VERTIGO WIRE-LOCK carabiner, simplifying their functionality Learn More
-
Petzl Jag Rescue Kit$1,029.53Ready-to-use reversible rescue kit designed to easily pick off and lower a victim. Learn More
-
Robertson Lanyards: Custom Length Safety Lanyards$21.12Lanyards are used for protection on high zip lining, ropes courses, adventure courses, industrial heights and a variety of home applications. These are designed to meet the standards of high ropes course/zip line protection and many industrial requirements. Learn More
-
Singing Rock Technic Full Body Harness$194.65Learn More
A fully adjustable, full body harness for work positioning and fall-arrest. Padded hip belt and leg loops for comfort. Available in Easy Lock buckle or Speed Lock buckles. NFPA version includes Speed Lock buckles and all steel components and attachment points.
- Independently adjustable leg loops and shoulder straps
- Front and rear (dorsal) attachment point for descender placement or work positioning (EN813)
-
Lateral attachment points in accordance with EN 358
- Aluminum D-rings are movable into "parking position" avoiding being caught-up while in use
- Easy-Lock buckles enable fluent and fast adjustment to fit to users body
-
Slots designed to secure hanging equipment
- Identification and methodical label
- Chest attachment point according to EN 361
- D-ring, flat and padded dorsal attachment point according to EN 361
- Weight: 1620 grams / 57 oz
-
CE 1019, EN 358, EN 813, EN 361
-
CMI Micro Haul Pulleys$209.37The perfect size for light and tower rescues. Fits ropes from 8mm to 1/2". Features built in safety cam for use in "jigger" or "short haul" systems. Use with CMI micro single or double pulley 3:1 or 4:1 mechanical advantage systems. Features a centered bronze bushing. Strength: 7000 lbs. The CMI Single Micro Hauler is 154 mm. tall, 53 mm wide, and 40 mm. thick and 19 g. Learn More
-
Head Rush zipSTOP Zip Line Braking System$5,940.00The Head Rush zipSTOP Braking System. This zipSTOP Brake Trolley is engineered for a fine balance. It is able to handle the abuse of heavy impact collisions, yet light enough to increase the odds of reliable reset. Learn More
-
Head Rush zipSTOP IR/ zip STOP IR Zip Line Braking System$6,468.00The best brake for your zip line,Head Rush zipSTOP Zip Line Brake uses Head Rush's self-regulating eddy current magnetic braking system to brake zip line riders smoothly, comfortably, and consistently, even at high speeds. Learn More
-
Petzl I'D Belay Device DescenderAs low as $351.95The Petzl ID is a self-braking descender with an anti-panic function built in. Learn More
-
-
Robertson Zip Tour Trolley - Professional Zip Line TrolleyAs low as $330.00A practical zip line tour trolley for professional zip line tours and canopy tours. The ultra-long design provides superior stability and travel on any zip line at any speed. Learn More
-
Petzl TRAC GUIDE Zip Line Trolley$208.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g
-
