Search results for: 'steps locking rescue carabiners'

The KAA is a self contained mechanical advantage system for tensioning lines or lifting people during rescues. In addition, as the KAA is certified to EN 354, it can be used for workplace stabilization, as a restraint system (open/closed), and for controlled lowering. Its strap-based construction makes it the most compact and lightweight system on the market. Depending on the orientation, it offers a 4:1 or 5:1 lifting ratio with an efficiency of 91%. The KAA is packaged compactly and ready for immediate use, so that no valuable time is lost when it is required. A swivel is provided at each end to prevent the system from twisting. The hand lever on the draw cord makes it easier to pull and can also be used as a lowering lever.

Weight: 500g (1.1lbs)

MBS: 22kN

Certification: EN 354

Efficiency: 91%

• Compact and lightweight due to strap-based construction
• 4:1 or 5:1 mechanical advantage
• Can be set up in seconds
• Swivels on both ends

Fully adjustable full body harness intended for rope courses and adventure parks.

• CE 1019, EN12277, EN161
• front attachment point for belaying and rappeling according to EN 12277 type C
• waist belt and the leg loops without the padding enables to put the harness to every person
• rear steel D-ring with a bearing capacity of 15 kN according EN 361
• waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
• red webbing strap stitched into the buckles simplify handling with them
• all steel components are finished with E-coating technology for higher corrosion resistance
• left leg loop with red color helps to put the harness on
• waist belt webbing is in red as well for easier orientation in the harness
• dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
• construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
• Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
• Weight: 1050g
• Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)

Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version. 

If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate. 

Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards. 

To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket. 

• Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
• One rock climbing hold and bracket assembly included. 
• This product comes fully assembled and includes attachment screws.
• Insert into the slot and slide down to lock in place.
• Slide up and lift out of the slot for easy removal.
• Ten different designs, which are all jugs. 
• Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.