Search results for: 'tool d ropes course harness'

The Zip Line Spreader Bar is used in conjuction with the ARC Harness to keep the attachment points equally spread and to prevent pressure on the participant. Can also be used to help the handicapable safely go down a zipline when used along side a Fusion Learn More

Yates Nylon & Dyneema Daisy Chains, Classic designed daisy chain made of 11/16" Nylon Super Tape or 12 & 14 mm Dymeema webbing. Learn More

The Zip Line Tether was built to connect our Full Body harness to the Zip Line pulley Learn More

A Super-efficient slicing tool that makes the most of its simple design and sturdy construction, the Vital Zip Knife holds a utility blade which is easily replaced once dull with a quick release of the Phillips screw holding the blade in position. The Vital Zip works well for cutting webbing and rope and to remove clothing from injured persons in rescue situations. And its feather light aspect means it can be carried along on a belt or in a kit pack without adding undue weight to your gear.

Learn More

In a bind, this ultra-lightweight ascender can be used to build hauling systems or as a Prusik-replacement in self-rescue situations. Learn More

CMI Zip Line Trolley Lanyard makes zip lining a cinch. A rider should have two separate lanyards attached to the trolley for a safe and secure zip lining ride Learn More

Steel cable with aluminum rungs. Can be used in ropes courses, caving, rope access work, or emergency preparedness kits.

• Length 32 feet
• Weight: 3 lbs 4 oz.
• Width: 6"
• Breaking Strength: 1324 lbs.

Learn More

Petzl CONNEXION VARIO Adjustable anchor strap Learn More

CONNEXION FAST Rapid adjust anchor strap Learn More

When closed with a wrench, this aluminum quick link is used to close harnesses that have two attachment points that must be joined with a connector. Learn More

Square Curved Washers for nut eye bolts and machine bolts. Galvanized Square washers designed for outdoor use in challenge courses, zip lines and other outdoor applications. Learn More

This rainbow para cord is ideal for lazy lines (or haul lines) on ropes courses and climbing walls, as well as general use. Kernmantle construction for high strength and low stretch. 350 lb strength rating. 1/8" (3mm).  Made in the Mexico.

Learn More

This rainbow para cord is ideal for lazy lines (or haul lines) on ropes courses and climbing walls, as well as general use. Kernmantle construction for high strength and low stretch. 350 lb strength rating. 1/8" (3mm).  Made in the Mexico.

Learn More

CMI Twin Expedition Arborist Ascender, The Twin Expedition is the first single-handled dual ascender designed to meet the needs of industry leading arborist professionals. The EXPTWIN easily accommodates three rope techniques - 2:1 doubled rope technique (DdRT), 1:1 single rope technique (SRT), and 1:1 twin line ascent (DbRT). Learn More

This is a great low profile SRD with a parallel attachment to easily align cable and belay loading. Super strong with a triple axle design and a thick folded plate design. Learn More

Nylon Shock Cord consists of a stranded rubber core covered with braided fiber resulting in an elastic cord with consistent stretch and strength. The durable "bungee type" cord is covered with nylon. Learn More

They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More

Lock washers are a critical component to through bolts on wood poles. Pole shrinkage mandates the use of double coil lock washers to keep pressure on the nut and bolt to prevent loosening. Learn More

Deep Cut Pole Auger Bits Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

The Figure 8 by Omega Pacific remains a popular device for their simplicity, durability and dependability. Learn More

Used as spacers or supports under screw or bolt heads. Our washers are heat treated galvanized. Learn More

Joko I & Y Lanyards, These are used in traditional via feratta settings as well for park staff. For participants, however, we recommend the use of an "Always On" system. Learn More

Snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by Increasing its elasticity and maximizing its internal strength. Learn More

Petzl Shunt Ascender, It locks onto either a single rope or double ropes of the same diameter and holds well on icy and muddy ropes. Learn More

Innovative belay device with high braking performance for single ropes. The optimized Mega Jul geometry ensures easy and secure belaying even with thicker ropes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More