Search results for: 'must line rope'nvopzp and 1 1 or is'
-
Petzl Ascension AscenderAs low as $98.84The Ascension Ascender by Petzl is the benchmark for handled ascenders and has been refined to provide greater comfort; efficiency, ease of use. Learn More
-
CMI RTTROLLEY Rapid Transit ZiplineTrolley$230.95CMI RTTROLLEY Rapid Transit ZiplineTrolley, Stainless Steel sideplates, two 2" Stainless sheaves, Bearing, and Stainless Steel axle. Taking from the popularity of their velocity zipline trolley, CMI has launched a 2" wheel version, the RT zipline Trolley. Learn More
-
Mio Cable Grab for 3/8" Wire Rope$235.40
atented cable grabs are designed to provide fall protection for workers ascending or descending from a variety of ladders or vertical structures. The stainless steel cable grab is easily removed or repositioned along a cable. If a fall occurs, the cable grab is designed to immediately lock onto the cable and prevent a free fall. Sold with an integrated shock absorber. Users should be familiar with all warnings and instructions and receive training in the proper use of this device. Product Specs: Universal design Auto traveling operation Durable, lightweight stainless steel design Meets applicable OSHA Standards and ANSI requirements. Recommended lifelines 3/8″ diameter stainless steel or galvanized 7×19 aircraft cable (non-lubed) with minimum tensile strength of 8,000 lbs.
MUST be attached to worker’s harness using ANSI rated autolocking carabiner (NOT included)
Learn More -
Snap Shackle - Quick Release Snap Shackle w/Swivel$158.35Snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by Increasing its elasticity and maximizing its internal strength. Learn More
-
CMI Comtrolley Companion Trolley Pulley$151.73CMI Comtrolley Companion Trolley Pulley, Works best paired with the CMI Velocity Micro Trolley or Rapid Transit Trolley but it can be used by itself or as a companion for any of the other CMI cable trolleys. Learn More
-
Petzl Go Steel Oval Quick Link$9.17When closed with a wrench, this steel quick link becomes a semi-permanent anchor ring. Learn More
-
Petzl Jane Lanyard$39.53Can be combined with an ABSORBICA energy absorber to set up an energy-absorbing «I» or «Y» lanyard of less than two meters in length Learn More
-
JP Step II Pole Step / Tree Step$42.24
Just Perfect Pole Steps : JP Step II
The JP Step I and JP Step II are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples. These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.
Learn More -
Rope Log: Rope Use Log$14.30CMC Rescue's All-Weather Rope Log contains 20 rope log forms on heavy, Rite-in-the-Rain paper. Ample space is provided to document critical lifeline information and log use and inspection. Learn More
-
Omega XXX-Large Steel D Carabiner$44.96This industrial size carabiner combines a wide gate opening and high strength, useful for attaching to rungs on aerial ladders, buckets and industrial rescue or rope access anchors points that are too big for the large rescue carabiners. Learn More
-
Petzl Shunt Ascender$105.53Petzl Shunt Ascender, It locks onto either a single rope or double ropes of the same diameter and holds well on icy and muddy ropes. Learn More
-
Zipline PVC Tree Wrap 3/8" cable and hose 30"$50.16If you plan to wrap the cable around a tree or post and not use bolt a tree wrap is what you need. Learn More
-
Kask Helmet Decal Set$22.44Customize your KASK rescue helmet while adding increased night visibility. Decals are manufactured from high-quality 3M reflective material and die-cut for easy installation. Learn More
-
New England Tech CordAs low as $3.96The strongest and smallest cordellete or chock cord available. Tech Cord's 5mm diameter and 5,000 lbs. tensile strength is achieved using a unidirectional Technora core and a bombproof polyester sheath. Learn More
-
Petzl Spirit Carabiner$14.45The SPIRIT is a non-locking progression carabiner, only for technical climbing. Because the SPIRIT does not lock, and has a Keylock system that prevents snagging, clipping is easier. Learn More
-
Head Rush Impact Trolley Sheave Replacement Kit$92.40The Head Rush Impact Trolley Sheave Replacement Kit allows you to replace your Impact Trolley sheave assembly should they wear out or become damaged. Learn More
-
Head Rush FlightLine Free Fall Device$23,760.00Head Rush FlightLine is an extreme free fall ride for theme parks, adventure parks, and carnivals that takes jumpers to heights never before dreamed. Learn More
-
Petzl Pantin Ascender$105.53Petzl Pantin Ascender, A big advantage for long rope ascents. With the Pantin Ascender supporting the foot, the body is held in a more upright position thus making the ascent faster and less tiring for the arms. Learn More
-
Head Rush Impact Trolley Impact Surface Replacement Kit$19.80The Impact Surface Replacement Kit allows you to replace the Impact Surface on your Impact Trolley should it wear out or become damaged. Learn More
-
Edlerid Shield Lite Helmet$131.93An ultra-light, In-Mold helmet with a robust webbing closure system. The lightweight design and excellent ventilation make it suitable for both sport climbing and mountaineering. Learn More
-
Head Rush TRUBLUE XL Replacement Webbing$330.00The Head Rush TRUBLUE XL Auto Belay is fitted with a webbing that can be replaced in the field by the owner using the Replacement Webbing. Learn More
-
Hyper Rack Rappelling Descender Rack$86.90Our HyperBars, a solid anodized aluminum bar with a single lock-off pin, allow for easier and safer lock offs. The HyperRack includes a single HyperBar. Learn More
-
Head Rush Impact Trolley Hook Accessory Kit Upgrade$54.12The Head Rush Hook Accessory is designed to keep the Impact Trolley and zipSTOP Brake Trolley attached after impact happens, making for easier rider retrieval. Learn More
-
Felco C112 Wire Rope Cutter$781.00The Felco C112 Cutter features maximum force transmission which applies the maximum leverage at just the right moment. This coupled with Swiss precision blades make this cutter very easy to use. Learn More
-
Petzl Vertigo Carabiner$32.93The VERTIGO TWIST-LOCK carabiner is designed for use on progression lanyards. Its ergonomic design and automatic locking system facilitate manipulations when passing intermediate anchors. Learn More
-
Head Rush zipSTOP Brake Trolley Catch Accessory Kit Upgrade$150.48The Catch Accessory is designed to keep the Impact Trolley and zipSTOP Brake Trolley attached after contact with each other, making for easier rider retrieval. Learn More
-
Sport Rack - Rappelling Descender$121.00CMI Sport Racks are formed from 5/16" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless steel over aluminum because of its "wearever" qualities. Learn More
-
Head Rush Auto Belay Tru Mount$153.95
The TRU-Mount Auto Belay mounting system is an elegant and cost-effective method to add the TRUBLUE Auto Belay to most climbing facilities.
Learn More -
Zippy Clip N Zip Trolley$236.45
The Zippey Trolley is bi-directional, so there’s no wrong way to fit it. Zippey offers a one handed action with either a single or double locking mechanism for increased safety.
Zippey has a speed rating of 60mph (90kph), which is based on the use of the same high spec deep groove, double row ball bearings, as used in our Zipspeed range. The expected life of the bearings should be more than 1000 miles (1500km).
Accessories available for the Zippey Trolleys
ARC – Anti Roll Back Cam. This innovative add on solves many of the issues associated with modern zip lines. Riders who reach the egress platform can roll back out onto the line requiring staff intervention. The ARC ensures that the rider remains in position over the egress platform by camming against the zip line cable maintaining their position.
Handle Accessory – There is now an available handle accessory for the Zippey making it possible for riders to ‘steer’ into the arrival station.
Learn More -
Robertson Adjustable Lobster Claws$83.82These are the basic model with NO snap hooks or Zorber. These are only appropriate for clipping in to protection with some dynamic load absorbing features like rope or fairly slack cable such as a belay cable on a high ropes course or zipline. Learn More
-
Snap Hook - Industrial Snap Hooks$16.50Snap hooks are recommended as they are easier for small hands, more ergonomically friendly and are permanently attached to the lobster claws. Learn More
-
Petzl Boreo Helmet$85.73Durable and very versatile, the BOREO helmet is suitable for climbing, mountaineering, caving, via ferrata, canyoning... Thanks to its hybrid construction, the helmet is both compact and head-covering. Learn More
-
Petzl Jag Rescue Kit$1,029.53Ready-to-use reversible rescue kit designed to easily pick off and lower a victim. Learn More
-
Petzl AM'D Pin-Lock$40.85The Am'D PIN-LOCK asymmetrical aluminum carabiner is designed for use with groups. It secures the connection of the user thanks to its PIN-LOCK system, which can only be opened by the operator with a specific unlocking tool. Learn More
-
Robertson Lobster Claws$39.82These lobster Claws are a unique, non-adjustable set of positioning / safety lanyards designed specifically for program high ropes courses. Learn More
-
Klein Tools Double Face Lineman's Hammer$75.24
CIFA: 10286
Klein Tools 809-36 hammer is designed and created to strike through jobsite challenges. Engineered with the professional in mind, each tool is job-matched to fit the task at hand.
Features:- Designed for pole-line work
- Rugged and well-balanced, with the weight to drive lag bolts
- Forged, tempered-steel head for use in tight areas
- Identical faces with round-crown driving surface and beveled edges