Search results for: 'size mount climbing rope'

By incorporating a rigid stem on this belay/rappel device, climbers go from full lock-off to whipping out rope in a single, smooth action. No more binding up as the device tries to free itself. The amount of friction can be easily adjusted to suit your particular need. Climbing with fat ropes, a skinny partner or on low-angle slabs? Belay with the U-Grooves and clip into the bottom hole of the XF Forge for less friction. For the ultimate control, wrap that skinny cord around the rigid stem and rappel, figure-8 style.

Learn More

Pulley carabiner, available in versions with or without TRIACT-LOCK locking system. Learn More

Voltige Chest Harness will also increase your "hang" comfort and keep your body in an upright position in case of a fall. Must use with a Sit Harness. Learn More

Because small children do not have well-defined hips for a waist belt to latch onto, the full body design is necessary for safety on any zipline/ropes course. Learn More

Stainless steel sideplates, 3" red anodized aluminum sheave, bushing, and stainless steel axle. 

*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	1/2"	6.75x5.25in	1.65lb	91.7%

 

 

 

Learn More

The Head Rush Brake Trolley is a replacement for the brake trolley that came with your Head Rush zipSTOP Zip Line Brake. Please ensure that you select the correct size for your zip line cable. Learn More

Red/Black anodized aluminum sideplates, two 3" aluminum sheaves, bushing, and stainless steel axle. 

 *Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.  *Not Certified*

 

MBS	Rope Capacity	Size	Weight	Efficiency
12000lbs	1/2"	10x4in	2.6lb	184%

Learn More

Petzl Pandion Harness, Adjustable leg loops allow size to be adjusted depending on comfort desired or layers of clothing worn and permit the harness to be put on when wearing skis or crampons Learn More

The Rattle Stop is a replacement for the part that comes with your zipSTOP Zip Line Brake. Learn More

CMI EXPEDITION ASCENDER, The Expedition Ascender is a perfect choice for big wall or mountaineering endeavors. Engineered for comfort, the handle opening is extra wide to accommodate gloved hands. Works with 7mm-12mm ropes. Sold individually. Learn More

Very compact and lightweight HMS carabiner. Ideal for alpine climbing. Learn More

An adjustable harness for climbing centers, guided courses and training events. Learn More

An adjustable harness for climbing centers, guided courses and training events. Learn More

Probably the most common zip line trolley in use. Super heavy duty steel sheaves and sideplates for long lasting zip line and ropes course use. 1/2" or 3/8" cable. Learn More

O-rings for using the SMART BELAY X in vertical climbing elements.

Learn More

Symmetrical heavy duty oval in hardened zinc plated steel. Larger size and better gate clearance than traditional oval carabiners. Keylock, catch free, gate system for enhanced safety and function. Learn More

Petzl P42 Caritool, A carabiner-shaped tool holder designed to organize gear attached to a harness. Ice-screws, pitons, cams, as well as small tools, can be arranged and accessed single-handedly Learn More

We offer three different style of pilot auger bits for 1/2" lags for ropes course decks, zip line decks and general deck construction for 1/2" & 5/8" lag bolts Learn More

Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps. This is the step only. These steps can replace common utility pole steps that have an upturned hook end.

Learn More

Deep Cut telephone Pole Auger Bits: 24", Super long 24" Pole Auger Bits for telephone poles, utility poles, treated poles, ropes course and zip line poles. Designed for making deep cuts in utility poles, pressure treated lumber, railroad ties, and wet or frozen lumber. Learn More

The Impact Trolley Cover Plate Replacement Kit allows you to replace the Cover Plates on your Impact Trolley should they wear, get misplaced or damaged Learn More

Can be put on in under 30 seconds!!! Innovative harness for high ropes courses and adventure parks. Its easy-to-use, uncomplicated design means that visitors can put it on/take it off on their own. Learn More

Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

Yates Nylon & Dyneema Daisy Chains, Classic designed daisy chain made of 11/16" Nylon Super Tape or 12 & 14 mm Dymeema webbing. Learn More

Haul kit for pickoffs, making a releasable anchor, or tensioning a system, thanks to its 4:1 mechanical advantage and excellent efficiency (sheaves with sealed ball bearings). Learn More

Petzl Dog Harness - This lightweight and compact harness allows the dog to function normally while wearing it and is designed for airlifting and using lanyards during a search. Numerous settings adapt to different canine shapes and sizes and prepositioned elastic allows the harness to be easily adjusted on the dog. Learn More

Petzl Bermude Rescue Triangle is designed for the rapid evacuation of victims. The Bermude is very easy to put onto a person, even in a sitting position. With its alternative attachment points, it easily adapts to all body sizes from children to adults. Learn More

Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More

Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps

Learn More

Wider waist pad! Voyager Riggers Harness now comes with same width waist pad as Rope Access Harness. For professional use in stage rigging and construction applications where a lightweight Class III harness with positioning rings and multiple attachment points are desired. Learn More

Misty Mountain Challenge Harness – has quick adjust waist and leg buckles. Designed specifically for climbing gyms, ropes courses and challenge towers, the Challenge Harness is simple to use, safe and durable. It features a single reinforced tie-in point and pre threaded, quick adjust waist and leg loop buckles. The single tie in point, along with the quick adjust waist and leg buckles, provide for a quick set up and the durable components ensure much hard wear. Quick and convenient, the Challenge Harness is a great all around program harness.

Youth: Green tie-in point
Standard: Blue tie-in point
X-Large: Black tie-in point

Learn More

Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More

FOOTAPE Adjustable webbing foot loop, Attaches to the ASCENSION handled rope clamp or the BASIC rope clamp for rope ascents Learn More

Petzl Shunt Ascender, It locks onto either a single rope or double ropes of the same diameter and holds well on icy and muddy ropes. Learn More

Innovative belay device with high braking performance for single ropes. The optimized Mega Jul geometry ensures easy and secure belaying even with thicker ropes. Learn More

Fully adjustable full body harness intended for rope courses and adventure parks.

• CE 1019, EN12277, EN161
• front attachment point for belaying and rappeling according to EN 12277 type C
• waist belt and the leg loops without the padding enables to put the harness to every person
• rear steel D-ring with a bearing capacity of 15 kN according EN 361
• waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
• red webbing strap stitched into the buckles simplify handling with them
• all steel components are finished with E-coating technology for higher corrosion resistance
• left leg loop with red color helps to put the harness on
• waist belt webbing is in red as well for easier orientation in the harness
• dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
• construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
• Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
• Weight: 1050g
• Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)

Learn More