Search results for: 'size must climbing rope'

Deep Cut telephone Pole Auger Bits: 24", Super long 24" Pole Auger Bits for telephone poles, utility poles, treated poles, ropes course and zip line poles. Designed for making deep cuts in utility poles, pressure treated lumber, railroad ties, and wet or frozen lumber. Learn More

Can be put on in under 30 seconds!!! Innovative harness for high ropes courses and adventure parks. Its easy-to-use, uncomplicated design means that visitors can put it on/take it off on their own. Learn More

Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

Petzl Bermude Rescue Triangle is designed for the rapid evacuation of victims. The Bermude is very easy to put onto a person, even in a sitting position. With its alternative attachment points, it easily adapts to all body sizes from children to adults. Learn More

Petzl P42 Caritool, A carabiner-shaped tool holder designed to organize gear attached to a harness. Ice-screws, pitons, cams, as well as small tools, can be arranged and accessed single-handedly Learn More

Stainless Steel Cable clamps are ideal for use in salty and acidic environments like zip lining close to oceans or salt lake. These are durable and outlast Drop Forged clamps in harsh environments. Learn More

Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps. This is the step only. These steps can replace common utility pole steps that have an upturned hook end.

Learn More

Yates Nylon & Dyneema Daisy Chains, Classic designed daisy chain made of 11/16" Nylon Super Tape or 12 & 14 mm Dymeema webbing. Learn More

Yates Figure Eight Chest Harness, Great for use on zip line operations. Attachment points at waist and between shoulders. Safety attachment at rear of waist. Padded waist belt. Super easy to get on and adjust. Learn More

Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More

Misty Mountain Challenge Harness – has quick adjust waist and leg buckles. Designed specifically for climbing gyms, ropes courses and challenge towers, the Challenge Harness is simple to use, safe and durable. It features a single reinforced tie-in point and pre threaded, quick adjust waist and leg loop buckles. The single tie in point, along with the quick adjust waist and leg buckles, provide for a quick set up and the durable components ensure much hard wear. Quick and convenient, the Challenge Harness is a great all around program harness.

Youth: Green tie-in point
Standard: Blue tie-in point
X-Large: Black tie-in point

Learn More

Wider waist pad! Voyager Riggers Harness now comes with same width waist pad as Rope Access Harness. For professional use in stage rigging and construction applications where a lightweight Class III harness with positioning rings and multiple attachment points are desired. Learn More

Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More

Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps

Learn More

FOOTAPE Adjustable webbing foot loop, Attaches to the ASCENSION handled rope clamp or the BASIC rope clamp for rope ascents Learn More

Fully adjustable full body harness intended for rope courses and adventure parks.

• CE 1019, EN12277, EN161
• front attachment point for belaying and rappeling according to EN 12277 type C
• waist belt and the leg loops without the padding enables to put the harness to every person
• rear steel D-ring with a bearing capacity of 15 kN according EN 361
• waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
• red webbing strap stitched into the buckles simplify handling with them
• all steel components are finished with E-coating technology for higher corrosion resistance
• left leg loop with red color helps to put the harness on
• waist belt webbing is in red as well for easier orientation in the harness
• dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
• construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
• Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
• Weight: 1050g
• Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)

Learn More

Innovative belay device with high braking performance for single ropes. The optimized Mega Jul geometry ensures easy and secure belaying even with thicker ropes. Learn More

Snap hooks are recommended as they are easier for small hands, more ergonomically friendly and are permanently attached to the lobster claws. Learn More

Four-step etrier that attaches to an ASCENSION rope clamp for rope ascents or directly onto an anchor for progression in overhangs or roofs. Learn More

This is a great low profile SRD with a parallel attachment to easily align cable and belay loading. Super strong with a triple axle design and a thick folded plate design. Learn More

The adjustable FOOTCORD foot loop is used with an ASCENSION or BASIC rope clamp for rope ascents. Its 100 % Dyneema® construction increases durability. Learn More

Yates Adjustable Daisy Strap, The buckle axle is riveted for added security and strength. Contoured webbing eye at carabiner clip attachment end. This configuration allows the strap more rotation, thus reducing jamming in corners. Learn More

A compact, ultra-light belay and abseil device for half ropes and twin ropes. The only suitable device for use with the Flycatcher 6.9 mm. Learn More

Petzl Simple Descender, The hand holding the free end of the rope is used to control or stop the descent. In narrow pitches, the Simple Descender has the advantage of being able to follow along the rope on its own, without manipulation. It is for use with ropes from 9 to 12 mm. Learn More

Catch for PANTIN foot ascender, helps to keep the rope in the device during rope ascents. It is available for PANTIN in right- and left-foot versions. Learn More

Petzl ASAP Fall Arrest Device, In normal use, the device moves freely along the rope without any manual intervention and accompanies the user in all his movements. Learn More

Fall arrest harness that is comfortable for work and easy to use. It offers ergonomic stowage of MGO connectors and has fall indicators. It is certified to North American, European and Russian standards. Learn More

Petzl Swivel, Positioned between the rope and the load, the ball-bearing Swivel S allows the load to turn without twisting the rope. Learn More

Originally designed for single rope descents in caving, the Stop has become a standard tool for the rope access worker. The Stop is designed to automatically "stop" the descent when the red handle is not depressed. Learn More

Torse Shoulder Strap, The TORSE shoulder strap allows the CROLL ventral rope clamp to remain correctly positioned in order to optimize efficiency and comfort during rope ascents. Learn More

Fully adjustable harness with a single tie-in point. The top uses the Rock&Lock buckle system that improves fit and performance. Suited for challenge courses, indoor gym climbing or as a lightweight mountaineering harness.

• Weight: 366 grams 12.4 oz
• Number of buckles: 3
• Reinforced tie in
• Drop seat
• CE and UIAA Certified

Learn More

Firecracker Ladders are made with ¾” polydac rope with 12” center notched 1 ¼” diam hardwood dowels spaced and lashed at 18” intervals. Very challenging. Metal eye top and rope eye bottom.

 

Sold by: Linear Ft.

Learn More

The best brake for your zip line,Head Rush zipSTOP Zip Line Brake uses Head Rush's self-regulating eddy current magnetic braking system to brake zip line riders smoothly, comfortably, and consistently, even at high speeds. Learn More

Asymmetrical Y-shaped sewn lanyard made of flat webbing, * Used with an ASCENSION handled rope clamp for progression on a rope, * Asymmetrical Y-shape for ease of movement: Learn More

 Rescue Swivel helps to eliminate twisting in critical lines due to load rotation. Its 9000lb (40kN) MBS gives you piece of mind when moving the heaviest of loads, and its sealed ball bearing will keep it operating smoothly for years.

*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.  *Not Certified*

Size: 4 1/4" x 1 3/4"
Weight: 5.6 oz
Breaking Strength: 9,000 pounds

Learn More

Figure 8 descender, compact and lightweight. Square shape helps reduce rope twist. Learn More