Search results for: 'stainless steel cable climb'
- Did you mean
- stainless sleev cab38 clamp
- stainless sleev cab14 clamp
-
Petzl AVAO Sit Work harnessAs low as $297.39PetzlAVAO SIT Zipline/Work harness, With a ventral attachment point that distributes the load between the waistbelt and the leg loops during suspended work Learn More
-
Head Rush zipSTOP Zip Line Braking System$5,940.00The Head Rush zipSTOP Braking System. This zipSTOP Brake Trolley is engineered for a fine balance. It is able to handle the abuse of heavy impact collisions, yet light enough to increase the odds of reliable reset. Learn More
-
Machine BoltsAs low as $5.45Our Machine Bolts are hot dip galvanized, forged steel, quenched and tempered and are sold with hex nuts attached. Round or square washers and lock washers can be added separately. Learn More
-
Franklin Work Positioning Harness$181.50
- The Franklin seat provides more long-term comfort over the course of a long workday than hanging in a harness does.
- Excellent additon for use with accessability and universal climbing programs
- It is intended for use with Singing Rock's fall arrest or work positioning harnesses or equivelant.
- It is easy to adjust with Rock and Lock buckles.
- Wide sitting area ensures good stability and allows for comfortable hanging, as well as standing work positions.
- Three D-rings (bearing capacity 50kg) for gear suspension.
- Weight: 1650 grams/58 oz
-
New England Tech CordAs low as $3.96The strongest and smallest cordellete or chock cord available. Tech Cord's 5mm diameter and 5,000 lbs. tensile strength is achieved using a unidirectional Technora core and a bombproof polyester sheath. Learn More
-
XF FORGE BELAY DEVICE$21.99
By incorporating a rigid stem on this belay/rappel device, climbers go from full lock-off to whipping out rope in a single, smooth action. No more binding up as the device tries to free itself. The amount of friction can be easily adjusted to suit your particular need. Climbing with fat ropes, a skinny partner or on low-angle slabs? Belay with the U-Grooves and clip into the bottom hole of the XF Forge for less friction. For the ultimate control, wrap that skinny cord around the rigid stem and rappel, figure-8 style.
Learn More -
MISTY MOUNTAIN CHALLENGE HARNESSAs low as $82.50
Misty Mountain Challenge Harness – has quick adjust waist and leg buckles. Designed specifically for climbing gyms, ropes courses and challenge towers, the Challenge Harness is simple to use, safe and durable. It features a single reinforced tie-in point and pre threaded, quick adjust waist and leg loop buckles. The single tie in point, along with the quick adjust waist and leg buckles, provide for a quick set up and the durable components ensure much hard wear. Quick and convenient, the Challenge Harness is a great all around program harness.
Youth: Green tie-in point
Learn More
Standard: Blue tie-in point
X-Large: Black tie-in point -
Petzl Tibloc Ascender$38.45In a bind, this ultra-lightweight ascender can be used to build hauling systems or as a Prusik-replacement in self-rescue situations. Learn More
-
Petzl OXAN Carabiner$20.83Rugged and compact, the OXAN carabiner is particularly suited for use in difficult conditions where weight is not an issue: setting fixed anchors, connecting to metal structures... Learn More
-
Klein Linemans Wrench - Blue Smasher$110.00
Klein Tools' Lineman's Wrenches are forged from special bar steel and heat-treated for durability and long life. These wrenches are designed for use on heavy three-bolt guy clamps where clearance is limited. Each end has two different size openings, plus a hole at the larger end for turning-in standard pole steps.
- Forged from special bar steel and heat-treated for long life
- Each end has two different size openings
- Small end has 5/8-Inch and 13/16-Inch openings; large end features 29/32-Inch and 1-3/32-Inch openings
- Hole is provided at larger end for turning-in standard pole steps
- Made in USA
- Wrench is suited for use on the heavy three-bolt guy clamps on which clearance is limited
- Dark blue painted finish
-
Petzl ZigZag Prusik$369.53Petzl ZigZag Prusik The linked rings provide precision and fluidity when moving around. The pulley is mounted on ball bearings to allow the slack to be taken up easily. Learn More
-
TECHNIC - ANSI FULLBODY HARNESS$197.95
A fully adjustable, full body harness for work positioning and fall-arrest. Padded hip belt and leg loops for comfort. Available in Easy Lock buckle or Speed Lock buckles. NFPA version includes Speed Lock buckles and all steel components and attachment points.
- Independently adjustable leg loops and shoulder straps
- Front and rear (dorsal) attachment point for descender placement or work positioning (EN813)
-
Lateral attachment points in accordance with EN 358
- Steel D-rings are movable into "parking position" avoiding being caught-up while in use
- Easy-Lock buckles enable fluent and fast adjustment to fit to users body
-
Slots designed to secure hanging equipment
- Identification and methodical label
- Chest attachment point according to EN 361
- D-ring, flat and padded dorsal attachment point according to EN 361
- Weight: 1620 grams / 57 oz
-
CE 1019, EN 358, EN 813, EN 361
-
Mounting Kit for TRUBLUE and QUICKjump$65.95Use this turnkey kit for single-point mounting of your TRUBLUE Auto Belay or QUICKjump Free Fall Device, as specified in the Operator Manuals. Learn More
-
Y Tail - Instructor Ropes Course Lanyard with Shock Pack$108.52
Y Tail - Instructor Ropes Course Lanyard with Shock Pack is made from high quality US manufactured 1/2" black Nylon rope. Each lanyard has a shock pack and tripple locking steel carabiner for attachemnt to the harness, and ANSI rated load limiting device (shock pack) and two ANSI rated double locking snap hooks. Each lanyard is adjustable from 4'6" to 6' 4" .
Learn More -
CLICK-UP PLUS BELAY DEVICE WITH HMS$98.99
CLICK UP + is an innovative belay device with manual assisted-braking, designed for indoor and crag climbing. It can be used with 8.5-11mm single ropes. The CLICK UP + is compact and lightweight. Allows for the belayer to keep both hands on the rope while belaying or lowering the climber. The V-Proof System (patent pending) reduces the chance of error due to an incorrect handling of the rope when braking. CLICK UP + is supplied, and must be used together, with the specific HMS carabiner CONCEPT SGL HC. The wear-resistant anodizing and ACL system of the carabiners prevents the possibility of minor-axis cross-loading.
- Weight: 110 grams
- Rope diameter range: 8.5mm - 11mm
- CE and UIAA Certified EN15151-2:2012 type 2
-
Petzl CONNEXION VARIO Adjustable anchor strap$73.21Petzl CONNEXION VARIO Adjustable anchor strap Learn More
-
Petzl CONNEXION FAST Rapid adjust anchor strap$63.31CONNEXION FAST Rapid adjust anchor strap Learn More
-
SINGING ROCK ZAZA FULL BODY KIDS HARNESS$71.45Lightweight full body adjustable harness for kids without well-defined hips necessary for a standard waist belt harness.
- one size fits all children with a height of 95 -130 cm and a maximum weight of 40 kg (37 - 51 in / 88 lb)
- red color textile loops for correct attachment to the harness
- three fast buckles enable very quick and easy size adjustment
- elastic straps with a plastic buckle keep harness on the body when kids are playing on the ground
- rear padding of the harness keeps shoulder straps apart and makes dressing easier
- 40 mm wide webbing for leg loops to provide comfort when climbing
- Weight: 338g/11.9oz
- CE 1019, EN 12277, UIAA
-
Head Rush TRUBLUE XL Replacement Webbing$330.00The Head Rush TRUBLUE XL Auto Belay is fitted with a webbing that can be replaced in the field by the owner using the Replacement Webbing. Learn More
-
Klein Tools Double Face Lineman's Hammer$75.24
CIFA: 10286
Klein Tools 809-36 hammer is designed and created to strike through jobsite challenges. Engineered with the professional in mind, each tool is job-matched to fit the task at hand.
Features:- Designed for pole-line work
- Rugged and well-balanced, with the weight to drive lag bolts
- Forged, tempered-steel head for use in tight areas
- Identical faces with round-crown driving surface and beveled edges
-
Petzl Spiky Plus$46.13Anti-slip soles, adaptable to all shoe sizes, used for moving over snow and frozen or slippery surfaces. Learn More
-
Petzl Vulcan Carabiner$46.13High-strength VULCAN carabiners are designed for rescue professionals. With a large gate opening and high strength, these carabiners are ideal for setting multiple anchors where conditions are difficult and weight is not an issue. Learn More
-
TRUBLUE Replacement Webbing$211.20The TRUBLUE Auto Belay is fitted with a webbing that can be replaced in the field by the owner using the Replacement Webbing. Learn More
-
Tarzan Economic Universal Full Body Harness$142.95
Fully adjustable full body harness intended for rope courses and adventure parks.
- CE 1019, EN12277, EN161
- front attachment point for belaying and rappeling according to EN 12277 type C
- waist belt and the leg loops without the padding enables to put the harness to every person
- rear steel D-ring with a bearing capacity of 15 kN according EN 361
- waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
- red webbing strap stitched into the buckles simplify handling with them
- all steel components are finished with E-coating technology for higher corrosion resistance
- left leg loop with red color helps to put the harness on
- waist belt webbing is in red as well for easier orientation in the harness
- dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
- construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
- Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
- Weight: 1050g
- Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)
-
Kong X-Large Carabiner$28.97The Kong X-Large Carabiner is ideal for big wall and belay stations where rope management is vital. The X-Large has a large amount of clearance, leaving you plenty of room for daisy chains and ropes. Learn More
-
CHANCE® 5004 Strap Guy Hook, 1 Bolt Storm Style$9.85
Finish: Galvanized, ASTM A-153 Material: Steel Width: 1-1/2 in Length: 1/4 in Vendor SKU: 5004 Minimum Order Qty: 1 UPC: 096359072133 Order Interval: 1 Manufacturer: Hubbell Power Brand: CHANCE® Features & Benefits: - Guy hook restricts guy wire from creeping down pole in wrapped strand guy applications. Can also be used as guy attachment, when used in compliance with deadend manufacturer's requirements. Hooks should be installed under head of bolt for maximum bolt shear strength.
-
Petzl FOOTAPE Adjustable Webbing Foot Loop$43.95FOOTAPE Adjustable webbing foot loop, Attaches to the ASCENSION handled rope clamp or the BASIC rope clamp for rope ascents Learn More
-
Beam Clamps: I-Beam ClampsAs low as $85.80They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More
-
Nail Chipper Tri-Cut Auger BitsAs low as $48.32Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More
-
Petzl TOP Harness$145.13The TOP chest harness transforms the AVAO SIT, FALCON and SEQUOIA SRT seat harnesses into fall arrest harnesses. The foam shoulder straps are widely spaced to reduce neck chafing. Learn More
-
CMI EXPEDITION ASCENDERAs low as $118.76CMI EXPEDITION ASCENDER, The Expedition Ascender is a perfect choice for big wall or mountaineering endeavors. Engineered for comfort, the handle opening is extra wide to accommodate gloved hands. Works with 7mm-12mm ropes. Sold individually. Learn More
-
Lag Screws: Lag BoltsAs low as $1.76Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More
-
Deep Cut Pole Auger Bits: 24"As low as $46.70Deep Cut telephone Pole Auger Bits: 24", Super long 24" Pole Auger Bits for telephone poles, utility poles, treated poles, ropes course and zip line poles. Designed for making deep cuts in utility poles, pressure treated lumber, railroad ties, and wet or frozen lumber. Learn More
-
7/16" - 9/16" AUGER BITS - Pilot bitsAs low as $17.00We offer three different style of pilot auger bits for 1/2" lags for ropes course decks, zip line decks and general deck construction for 1/2" & 5/8" lag bolts Learn More
-
ETD - Ropes Course Rescue Bag - 150' Rope$539.00
The ETD - Ropes Course Rescue Bag is filled with essential items to preform a aerial rescue. If there are extra items you require for you rescue bag simply order them separately and toss them in you bag.
Contents:
- 1 - Medium Orange Rope Bag w/Rope History Record - 150'
- 1- 7/16" x 100', 120' or 150' KMIII Orange Static Rope
- 6' - 5mm Tech Cord for Tying Prusik
- 1 - Pair EMT Shears
- 1 - Aluminum Rescue 8
- 4 - Steel Screw-Gate Big D Carabiners
- 1 - BFD/ATC (Belay Friction Device)
- 1 - 5 Step Easy Step Aider
- 1 - Set Fixed Length 1" Heavy Duty Webbing Lobster Claws w/Zorber & Hooks
-
Petzl Panji Harness$105.53PANJI adventure park/zipline harness is a one size harness covering a very wide range of body sizes. Learn More